Author Topic: Interesting Apollo Guidance Computer emulation website  (Read 2596 times)

shuttleman

  • Newbie
  • *
  • Posts: 5
    • View Profile
Interesting Apollo Guidance Computer emulation website
« on: December 10, 2014, 04:57:47 PM »
http://svtsim.com/moonjs/agc.html

----------------
Simulated Saturn 5 Launch Checklist
  • Press Enable IMU button.
  • Wait 85-90 seconds until NO ATT light turns off.
  • Enter V37E01E to initiate major mode 01 (Prelaunch or Service Initialization). PROG should read 01, if not try again in few seconds.
  • Wait until IMU is calibrated (pitch 90).
  • Major mode 02 (Prelaunch or Service Gyrocompassing) will automatically start in few seconds (PROG shows 02).
  • Press Launch button.
  • MET (Mission Elapsed Time) clock starts running.
  • Major mode 11 (Earth Orbit Insertion Monitor) will start after the detection of the launch event.
  • DSKY updates every two seconds with the latest state-vector data:
    • R1 = velocity (XXXXX ft/s).
    • R2 = the altitude rate (XXXXX ft/s).
    • R3 = the altitude above the pad (XXXX.X nmi).
  • The powered flight lasts 11 minutes and 44 seconds. Both roll and pitch programs are executed.
  • You may monitor the orbit parameters at any time after the launch by entering V82E:
    • R1 = the apocenter altitude (XXXX.X nmi).
    • R2 = the pericenter altitude (XXXX.X nmi).
    • R3 = the time to free fall (XX XX min:sec).
  • After a successful launch, both the apocenter and pericenter altitudes should be >90 nmi.
  • Press PRO to return to major mode 11 display.
  • Enter V06N32E to display time from perigee:
    • R1 = 00XXX. hours
    • R2 = 000XX. minutes
    • R3 = 0XX.XX seconds
« Last Edit: December 10, 2014, 05:01:30 PM by shuttleman »